Welder Classes Albany NY

How to Find the Right Welding Technical School near Albany New York

Albany NY welding school graduateSelecting the right welding technical school near Albany NY is an important first step to starting your new occupation as a professional welder. But since there are so many schools to select from, how do you know which ones to consider? And more importantly, once you have narrowed down your options, how do you pick the right one? Most prospective students start by reviewing the schools that are closest to their homes. Once they have identified those that are within commuting distance, they are drawn toward the cheapest one. Yes, location and the cost of tuition are necessary concerns when examining welding trade schools, but they are not the only ones. Other factors include such things as reputation, accreditation and job placement rates. So before starting your search for a trade school to become a welder, it’s sensible to establish a list of qualifications that your chosen school must have. But before we delve into our due diligence checklist, let’s talk a little bit about how to become a welder.

Welder Certificate and Degree Programs

Albany NY welding trade school studentThere are several options to get training as a welder in a technical or trade school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are offered in Welding Engineering or Welding Technology, but are more advanced degrees than most journeyman welders will need. Some programs are also offered along with an apprenticeship program. Below are short explanations of the most typical welding programs offered in the Albany NY.

  • Diploma and Certificate Programs are normally offered by technical and trade schools and require about one year to finish. They are more hands-on training in nature, created primarily to teach welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or supplemental skills for experienced welders.
  • Associate Degree Programs will take 2 years to finish and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more extensive education than the diploma or certificate while still supplying the foundation that readies students to enter the workforce.

A number of municipalities and states do have licensing requirements for welders, therefore don’t forget to find out for your location of potential employment. As required, the welding school you choose should prep you for any licensing examinations that you will need to take in addition to supplying the proper training to become a professional welder.

Welding Certification Alternatives

Albany NY welder working in constructionThere are a number of institutions that offer welder certifications, which assess the skill level and knowledge of those applying. Numerous Albany NY employers not only require a certificate or degree from an accredited welding program, but also certification from a respected organization like the American Welding Society (AWS). A wide range of certifications are available based on the type of work that the welder does. A few of the skills that certification can acknowledge are the welder’s ability to

  • Operate in compliance with specific codes
  • Work with certain metal thicknesses
  • Work with certain types of welds
  • Work based on contract specifications

As already mentioned, many states, cities or local municipalities have licensing mandates for welders. Of those mandating licensing, some also require certification for different types of work. Certification is also a means to prove to employers that you are a highly skilled and qualified welder. So just as with licensing, look into the requirements for your location and make sure that the welding vocational school you select readies you for certification if needed.

Points to Ask Welding Vocational Schools

Questions to ask Albany NY welding schoolsAs soon as you have chosen the credential you would like to earn, a certificate, diploma or degree, you can begin to evaluate schools. As you probably know, there are a large number of welder trade and vocational schools in the Albany NY area. That’s why it’s necessary to determine up front what qualifications your chosen school must have. We have already covered a couple of important ones that most people look at first, which are location and tuition cost. As mentioned, although they are essential qualifications, they are not the only ones that need to be considered. After all, the program you select is going to provide the education that will be the foundation of your new vocation as a welder. So following are some additional factors you might want to evaluate before choosing a welder vocational school.

Accreditation. It’s extremely important that the welder trade school you select is accredited by either a national or a regional agency. There are two basic types of accreditation. The school may receive Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a specific program the school has, for instance Welding Technology. So make certain that the program you select is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting agency, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping make sure that you obtain a quality education, the accreditation can also help in getting financial assistance or student loans, which are often unavailable in Albany NY for non-accredited schools. Finally, for those states or local governments that mandate licensing, they may require that the welder training program be accredited as well.

Job Placement and Apprenticeship Programs. Numerous welding degree or diploma programs are offered in conjunction with an apprenticeship program. Various other schools will help place you in an apprenticeship or a job upon graduation. Find out if the schools you are considering help in placing students in apprenticeships or have a job placement program. These schools must have relationships with local unions and various metal working businesses to which they can place their students. More established schools may have a larger network of graduates that they can utilize for referrals. These programs can help students find employment and develop associations within the Albany NY welding community.

Completion and Job Placement Rates. The completion rate is the percentage of students that enroll in an educational program and finish it. It’s essential that the welder program you pick has a higher completion rate. A reduced rate may mean that the students who joined the program were unhappy with the training, the teachers, or the facilities, and dropped out. The job placement rate is also an indication of the caliber of training. A high job placement rate will not only verify that the program has a good reputation within the trade, but additionally that it has the network of Albany NY contacts to help students secure apprenticeships or employment upon graduation.

Up-to-date Equipment and Facilities. Once you have narrowed down your selection of welder schools to 2 or 3 possibilities, you should consider going to the campuses to look over their facilities. Make sure that both the equipment and the facilities that you will be instructed on are modern. Specifically, the training equipment should be comparable to what you will be working with in the field. If you are not sure what to look for, and are already in an apprenticeship program, ask the master welder you are working under for guidance. If not, ask a local Albany NY welding contractor if they can give you a few suggestions.

School Location. Even though we already briefly discussed the importance of location, there are a couple of additional points that we should cover. You should bear in mind that unless you have the ability to move, the welding program you select needs to be within commuting distance of your Albany NY home. If you do opt to attend an out-of-state school, apart from moving expenses there may be higher tuition fees for out-of-state residents. This is particularly true for welding degree programs offered by community colleges. Also, if the school provides a job placement or apprenticeship program, more than likely their placements are within the school’s local community. So the location of the school should be in an area or state where you ultimately will wish to work.

Smaller Classes. Individualized instruction is important for a manual trade such as welding. It’s easy to be overlooked in bigger classes and not get much personalized instruction. Find out what the usual class size is for the welder programs you are reviewing. Ask if you can sit in on a few classes so that you can observe just how much personal attention the students are receiving. While there, speak with a few of the students and get their feedback. Also, talk to some of the trainers and find out what their welding experience has been and what credentials and certifications they hold.

Convenient Class Scheduling. Some people learn a new profession while still employed at their present job. Check to see that the class schedules for the schools you are considering are flexible enough to meet your needs. If you can only attend classes in the evenings or on weekends near Albany NY, make sure that the schools you are assessing offer those alternatives. If you can only enroll on a part-time basis, confirm that the school you pick offers part-time enrollment. Also, ask what the policy is to make up classes should you miss any because of illness, work or family circumstances.

Online Welding Training

student attending welding classes online in Albany NYWelding is very much a hands-on kind of vocation, and therefore not very compatible with training online. However, there are some online welding courses offered by specific community colleges and technical schools in the greater Albany NY area that may be credited toward a certificate or degree program. These classes mainly cover such topics as reading blueprints, safety,, and metallurgy. They can help provide a beginner a basis to start their training and education. Nevertheless, the most significant point is that you can’t learn how to weld or work with welding materials unless you actually do it. Naturally that can’t be accomplished online. These skills have to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is more appropriate for seasoned welders that would like to advance their knowledge or perhaps earn a more advanced degree. So if you should find an online welding certificate or degree program, be very cautious and confirm that the larger part of the training is done on campus or in a workshop type of environment.

Attending a Welding School in Albany NY?

If you have decided to enroll in a welder training program in the Albany New York area, you may find the following information both informative and helpful about the location of your new school campus.

Albany, New York

Albany (/ˈɔːlbəni/ ( listen) ALL-bə-nee) is the capital of the U.S. state of New York and the seat of Albany County. Albany is located on the west bank of the Hudson River approximately 10 miles (16 km) south of its confluence with the Mohawk River and approximately 150 miles (240 km) north of New York City.

Albany is known for its rich history, commerce, culture, architecture, and institutions of higher education. Albany constitutes the economic and cultural core of the Capital District of New York State, which comprises the Albany-Schenectady-Troy, NY Metropolitan Statistical Area, including the nearby cities and suburbs of Troy, Schenectady, and Saratoga Springs. With a 2013 Census-estimated population of 1.1 million [6] the Capital District is the third-most populous metropolitan region in the state. As of the 2010 census, the population of Albany was 97,856.

The area that later became Albany was settled by Dutch colonists who in 1614, built Fort Nassau for fur trading and, in 1624, built Fort Orange. In 1664, the English took over the Dutch settlements, renaming the city as Albany, in honor of the then Duke of Albany, the future James II of England and James VII of Scotland. The city was officially chartered in 1686 under English rule. It became the capital of New York in 1797 following formation of the United States. Albany is one of the oldest surviving settlements of the original British thirteen colonies, and is the longest continuously chartered city in the United States.[7]

Pick the Right Welding Tech Program Albany NY

Choosing the best welder training program will probably be the most critical decision you will make to launch your new career. You originally stopped by our website because you had an interest in Welder Classes. However, as we have discussed in this article, there are several things that you will need to examine and compare among the programs you are reviewing. It’s a must that any welding training program that you are examining includes a lot of hands-on training. Classes should be smaller in size and each student should have their own welding machine to train on. Classroom education needs to provide a real-world perspective, and the curriculum should be current and conform with industry standards. Courses differ in length and the type of credential offered, so you will have to determine what length of program and certificate or degree will best satisfy your needs. Each program provides different options for certification also. Perhaps The ideal means to research your final list of schools is to go to each campus and speak with the students and faculty. Invest some time to sit in on some classes. Inspect the campus and facilities. Make certain that you are confident that the program you decide on is the right one for you. With the proper training, hard work and commitment, the end result will be a new career as a professional welder in Albany NY.

 

The location could not be found.

 

Business Results 1 - 10 of 1

Govel Welding
4 Reviews
Metal Fabricators
Phone:
1932 Central Ave, Albany, NY 12205