Learn MIG Welding Ashland KS

How to Enroll In the Right Welding Trade School near Ashland Kansas

Ashland KS welding school graduateChoosing the ideal welding school near Ashland KS is an essential first step to launching your new occupation as a professional welder. But since there are numerous schools to pick from, how do you know which ones to consider? And more significantly, once you have fine tuned your alternatives, how do you select the best one? Most prospective students start by checking out the schools that are closest to their residences. Once they have located those that are within commuting distance, they gravitate toward the cheapest one. Yes, location and tuition cost are crucial issues when evaluating welder technical schools, but they are not the only ones. Other concerns include such things as accreditation, reputation and job placement rates. So before beginning your search for a trade school to become a welder, it’s sensible to develop a list of qualifications that your selected school must have. But before we delve into our due diligence checklist, let’s cover a little bit about how to become a welder.

Welding Certificate and Degree Training Classes

Ashland KS welding trade school studentThere are a number of options available to get training as a welder in a trade or technical school. You can earn a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Technology or Welding Engineering, but are more advanced courses than most journeyman welders will need. Some programs are also offered in conjunction with an apprenticeship program. Following are short descriptions of the most common welding programs offered in the Ashland KS.

  • Diploma and Certificate Programs are normally offered by trade and technical schools and require about a year to complete. They are more hands-on training in scope, created mainly to teach welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or supplemental skills for experienced welders.
  • Associate Degree Programs will take 2 years to complete and are most often offered by community colleges. An Associate Degree in Welding Technology furnishes a more well-rounded education than the certificate or diploma while still furnishing the foundation that readies students to enter the workforce.

Some municipalities and states do have licensing requirements for welders, so make sure to check for your location of future employment. As needed, the welding school you choose should ready you for any licensing exams that you will need to pass in addition to furnishing the proper training to become a professional welder.

Welder Certification Options

Ashland KS welder working in constructionThere are a number of institutions that offer welding certifications, which assess the knowledge and skill level of those applying. A large number of Ashland KS employers not only expect a certificate or degree from an accredited welding school, but also certification from a renowned organization such as the American Welding Society (AWS). A variety of certifications are available based upon the kind of work that the welder does. Some of the things that certification can acknowledge are the welder’s ability to

  • Work in compliance with specific codes
  • Work with certain metal thicknesses
  • Work with certain types of welds
  • Work in compliance with contract specifications

As formerly mentioned, some states, cities or local municipalities have licensing mandates for welders. Of those requiring licensing, a number also require certification for different kinds of work. Certification is also a way to prove to employers that you are an extremely skilled and qualified welder. So similarly as with licensing, look into the requirements for your local area and make certain that the welding technical school you choose preps you for certification if needed.

Subjects to Ask Welding Trade Programs

Questions to ask Ashland KS welding schoolsOnce you have chosen the credential you would like to attain, a diploma, certificate or degree, you can start to evaluate schools. As you are no doubt aware, there are many welder vocational and trade schools in the Ashland KS area. That’s why it’s necessary to decide in advance what qualifications your school of choice must have. We have previously discussed two significant ones that many people consider first, which are location and tuition cost. As stated, although they are very important qualifications, they are not the only ones that should be considered. After all, the school you pick is going to provide the education that will be the foundation of your new career as a welder. So following are some additional factors you may need to consider before picking a welder trade school.

Accreditation. It’s extremely important that the welder vocational school you choose is accredited by either a national or a regional organization. There are 2 standard kinds of accreditation. The school may earn Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a specific program the school offers, for instance Welding Technology. So make sure that the program you select is accredited, not just the school itself. Also, the accreditation should be by a U.S. Department of Education recognized accrediting organization, like the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping make sure that you get a quality education, the accreditation may also help in securing financial assistance or student loans, which are often unavailable in Ashland KS for non-accredited schools. Finally, for those states or municipalities that require licensing, they may require that the welder training program be accredited also.

Job Placement and Apprenticeship Programs. A large number of welding degree or certificate programs are offered combined with an apprenticeship program. Other schools will assist in placing you in a job or an apprenticeship after graduation. Find out if the schools you are looking at assist in placing students in apprenticeships or have a job placement program. The schools must have partnerships with local unions and other metal working businesses to which they can place their students. More established schools may have a more substantial network of graduates that they can rely upon for referrals. These programs can help students find employment and develop associations within the Ashland KS welding community.

Completion and Job Placement Rates. The completion rate is the portion or percentage of students that enroll in an instructional program and complete it. It’s important that the welding program you select has a higher completion rate. A lower rate may signify that the students who were in the program were dissatisfied with the training, the instructors, or the facilities, and dropped out. The job placement rate is also an indication of the quality of training. A higher job placement rate will not only affirm that the school has a good reputation within the industry, but also that it has the network of Ashland KS contacts to help students obtain apprenticeships or employment after graduation.

Modern Facilities and Equipment. After you have narrowed down your selection of welding schools to two or three possibilities, you should think out visiting the campuses to inspect their facilities. Verify that both the equipment and the facilities that you will be instructed on are up-to-date. Specifically, the training equipment should be similar to what you will be using in the field. If you are unsure what to look for, and are currently in an apprenticeship program, ask the master welder you are working under for guidance. Otherwise, ask a local Ashland KS welding professional if they can give you a few suggestions.

School Location. Although we previously briefly talked about the importance of location, there are a few additional issues that we need to address. You should keep in mind that unless you are able to move, the welding school you pick must be within commuting distance of your Ashland KS home. If you do decide to attend an out-of-state school, in addition to moving expenses there may be higher tuition fees for out-of-state residents. This is especially the case for welder certificate programs offered by community colleges. Furthermore, if the school offers a job placement or apprenticeship program, most likely their placements are within the school’s local community. So the location of the school should be in an area or state where you ultimately will wish to work.

Smaller Classes. Personalized instruction is important for a manual trade such as welding. It’s possible to get overlooked in larger classes and not get much one-on-one training. Ask what the typical class size is for the welding schools you are considering. Ask if you can sit in on a couple of classes so that you can observe just how much individual attention the students are getting. While there, speak with several of the students and get their feedback. Also, talk with a few of the instructors and ask what their welding experience has been and what credentials and certifications they hold.

Convenient Class Scheduling. Many people learn a new profession while still employed at their present job. Make sure that the class schedules for the schools you are reviewing are convenient enough to satisfy your needs. If you can only attend classes in the evenings or on weekends near Ashland KS, confirm that the schools you are looking at provide those choices. If you can only enroll part-time, verify that the school you select offers part-time enrollment. Also, find out what the protocol is to make up classes if you you miss any because of work, sickness or family circumstances.

Online Welder Training

student attending welding classes online in Ashland KSWelding is truly a hands-on type of trade, and therefore not very compatible with online training. Even so, there are a few online welding programs offered by certain community colleges and trade schools in the greater Ashland KS area that can count toward a certificate or degree program. These classes mainly deal with such topics as reading blueprints, safety,, and metallurgy. They can help provide a beginner a foundation to start their education and training. However, the most significant point is that you can’t learn how to weld or work with welding materials unless you actually do it. Clearly that can’t be accomplished online. These skills have to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is better suited for seasoned welders that desire to advance their knowledge or perhaps earn a more advanced degree. So if you should find an online welding degree or certificate program, be extremely cautious and make sure that the greater part of the training is done on campus or in a workshop type of environment.

Attending a Welding School in Ashland KS?

If you have decided to enroll in a welder training program in the Ashland Kansas area, you may find the following information both informative and helpful about the location of your new school campus.

Ashland, Kansas

Ashland lies along what was once a military road from Fort Dodge (now Dodge City, Kansas) to the north and Fort Supply in the Indian Territory to the south. In 1870, during the Comanche Campaign against the Native Americans, the Army built two redoubts along the Dodge/Supply trail near the current site of Ashland: the Bear Creek Redoubt, five miles to the north,[9] and the Cimarron Redoubt, nine miles to the south.[10]

In 2000, the median income for a household in the city was $32,721, and the median income for a family was $40,682. Males had a median income of $25,000 versus $20,313 for females. The per capita income for the city was $18,183. About 9.5% of families and 11.6% of the population were below the poverty line, including 19.3% of those under age 18 and 7.9% of those age 65 or over.

As of the census[3] of 2010, there were 867 people, 381 households, and 239 families residing in the city. The population density was 516.1 inhabitants per square mile (199.3/km2). There were 465 housing units at an average density of 276.8 per square mile (106.9/km2). The racial makeup of the city was 92.7% White, 0.9% Native American, 0.5% Asian, 0.1% Pacific Islander, 2.3% from other races, and 3.5% from two or more races. Hispanic or Latino of any race were 8.8% of the population.

Choose the Ideal Welding Tech School Ashland KS

Picking the right welding school will undoubtedly be the most important decision you will make to start your new trade. You originally stopped by our website because you had an interest in Learn MIG Welding. However, as we have discussed in this article, there are many things that you will need to examine and compare between the programs you are reviewing. It’s a prerequisite that any welding training that you are reviewing includes a considerable amount of hands-on instruction. Classes need to be smaller in size and every student should have their personal welding machine to train with. Classroom instruction should offer a real-world frame of reference, and the curriculum should be up-to-date and conform with industry standards. Courses differ in duration and the kind of credential provided, so you will need to determine what length of program and certificate or degree will best fulfill your needs. Every program provides different options for certification as well. Probably The ideal way to research your short list of schools is to visit each campus and speak with the teachers and students. Invest some time to sit in on a few classes. Tour the campus and facilities. Make sure that you are confident that the program you select is the best one for you. With the right training, hard work and commitment, the final outcome will be a new career as a professional welder in Ashland KS.

 

The location could not be found.

 

Business Results 1 - 10 of 0